User Manual

6
4.6 Current limit setting
P6 refers to current limit setting. The adjustable range is 1-25A. Press the button
to enter the parameter
modification interface. Press the button / for parameter selection. Press the button to save the parameter and
return to the selection interface of general setting options.
Fig. 4-6 Current Limit Setting Interface
4.7 Assistance sensor setting
P7 refers to the assistance sensor setting option, where the number of steel magnets of the assistance magnetic disk can
be set. The adjustable range is 5, 6, 7, 8, 9, 10 and 12. Press the button
to enter the parameter modification interface.
Press the button / for paramter selection. Press the button to save the parameter and return to the selection
interface of general setting options.
Fig. 4-7 Assistance Sensor Setting Interface
4.8 Power-on password setting
P8 refers to the power-on password setting option. PSd-Y means that a power-on password is required, and PSd-N
means that no power-on passwords are required. The default value of the display is PSd-N. Press the button
to enter
the modification interface, and press the button / to enter the selection interface.
If PSd-N is selected, press the button to return to the selection interface of custom setting options;
If PSd-Y is selected, press the button to enter the password setting interface. If you don’t want to change the
password, press and hold the button to exit the custom setting interface. If you want to change the password, press the
button for cursor movement and the button / for figure selection, and then press the button to return to
the selection interface of custom setting options.