User Manual

4
4. Custom setting
All parameters can only be set when your e-bike stops.
The steps for custom setting are as follows:
In the power-on state, when the display shows the speed of 0,
(1) Press and hold the buttons
and at the same time for more than 2 seconds to enter the selection interface of
custom setting options;
(2) Press the button / to switch the selection interface of general setting options, and press the button to
enter the parameter modification interface;
(3) Press the button / for parameter selection;
(4) Press the button to save the parameter and return to the selection interface of custom setting options;
(5) Press and hold the button to save the parameter and exit the selection interface of custom setting options.
4.1 Rated voltage setting
P1 refers to the rated voltage setting option. Available values include: 36V and 48V. Press the button to enter the
parameter modification interface. Press the button / for parameter selection. Press the button to save the
parameter and return to the selection interface of general setting options.
Fig. 4-1 Rated Voltage Setting Interface
4.2 Wheel diameter setting
P2 refers to the wheel diameter setting option. Available parameters include: 8-32 inches. Press the button
to enter
the parameter modification interface. Press the button / for parameter selection. Press the button to save the
parameter and return to the selection interface of general setting option.
Fig. 4-2 Wheel Diameter Setting Interface