User Guide

STEP 3 - CONNECT THE GATEWAY TO WI-FI

To restore the default settings of the device, press RESET button and hold it for

about 8 seconds - until both LEDs light up. The Universal Internet Gateway will

then reset to the default (factory) settings and the pairing process will begin.

Click „Register” to create

new account.

Enter the verication

code received in the email.

Remember that you

only have 60 seconds to

enter the code!

Then set the login

password.

Enter your e-mail

address to which the

verication code will be sent.

Wait for the app to congure the

thermostat with the selected Wi-Fi network.

The gateway has been installed

and displays the main interface.

Turn on Wi-Fi and Bluetooth

on your smartphone. It’s best

to connect mobile to the Wi-Fi

network to which you want to

assign the device.

Make sure the gateway is powered

on. Using the PIN included, press and

hold the RESET button for 8 seconds

until LEDs start lighting up.

The pairing mode is enabled.

In the app, select:

„Add Device”.

After nding the thermo-

stat, go „Next”.

Select the Wi-Fi network in which the

thermostat will operate and enter

the password of this network.

Name the device

and click „Done”.

Then choose:

„Auto Scan”.

Reset the gateway

Engo

STEP 2 - REGISTER THE NEW ACCOUNT

To register a new account, please follow the steps below: After installing the app and creating an account: