Operator`s manual

-> The optional Z-9 Custom Footswitch. It lets you select combinations of channels
and the two gain stages directly and control two sound-shaping features of
your choice. Three ¼” stereo jack plugs accept three dual footswitches that let
you control remotely the two channels, the two gain stages, ,
, , and .
-> A Noise Gate for Channel 2. Activate it to suppress excessive noise at
very high gain settings.
Among the hallmarks of this fine amp are painstaking workmanship and finishing as
well as rigorously tested and carefully selected quality components. You'll find
guidelines on care and maintenance of tube amps on page 19. Under the heading Tips
from the designer, you'll come across practical tips on the aforementioned features
throughout the manual. All critical information concerning the operation of this amp
is preceded by "NOTE", "CAUTION", "Read and heed" or some other eye-catching
comment. We're calling your attention to these remarks for reasons of safety or other
compelling motives, so please give them due consideration.
Everyone at ENGL is confident that the
and are sure to delight you:
Though this amplifier is relatively easy to handle and you're probably raring to give it a
go, I recommend that you read the owner's manual thoroughly before you power it
up. It is equipped with several safety features that require further explanation to
prevent malfunctions.
1. ENGL Raider 100 Tube Combo Amp E344 (1x12"speaker)
2. mains cord;
3. this manual;
4. a pamphlet entitled
.
At the back of the manual, diagrams of the front and rear
panels. As you're the descriptions of the amp's features, you'll gain a better
understanding of the topic of discussion if you unfold and refer to them as we go!
¼" unbalanced input jack. Plug your guitar in here using a shielded cord.
Depending on the type of cord and its shielding, you may occasionally encounter
interference from sources such as radio stations or powerful magnetic fields. When
this occurs, try connecting your guitar to the amp using different cords. What's more,
to minimize signal degradation due to high-frequency loss, use the shortest cords
feasible (as a rule, the shorter the cord, the less susceptible it is to high-frequency
attenuation).
Mid-Boost
Master A/B FX Loop Reverb
Instructions for the Prevention of Fire,
Electrical Shock and Injury
Raider tube amp's extraordinary versatility
outstanding features Simply plug in, play and be inspired
by the tone of your ENGL amp!
A few words of wisdom from the designer:
A tip from the designer:
Contents:
Front Panel Features
you'll find fold-out
reading
1 Input
6