Operator`s manual

Table of Contents

page

Introduction

Features and Functionality at a Glance

Contents

Front Panel Features:

Rear Panel Features:

Troubleshooting

Technical Data,

Tube Map, Tube Exchange Service

Wiring of Principal Connectors

Front Panel Diagrams for Noting Settings

Note:

Handling and Care

Input; Channel 1 Control Features

Power Amp section: Presence, Depth Punch, P.T.M. Display

Channel 2 Control Features, Mid Boost

Channel selection, Hi Gain, FX Loop

Stand By, Power

Serial FX Loop: Send, Return

Poweramp Output 4, 8 16 Ohms

Poweramp Output: speaker options

Power Amp section: Master A/B

Mains, Mains Fuse

S.A.C. Port for Z-9, Footswitch Ports

Detailed Specifications and Ratings

You'll find an ancillary pamphlet accompanying this owner's manual entitled

Instructions for the Prevention of Fire, Electrical Shock and Injury. Be sure to read it

before you plug in and power up the amp!

Technical specifications are subject to change without notice.

Noise Gate: Threshold Level

Main FX Loop: Send, Return, and Balance

Important note concerning the cooling fans

Remote Control Options

Configuration table for Z-9 settings

CAUTION! Please read and heed the following:

4, 5

6 - 8

10 - 12

14, 15

15, 16

16, 17

17, 18

20, 21