User`s manual

TECHNICAL HINTS, PROPER USAGE

• avoid using the amplifier in humid and dusty places

• do not put it in an unstable place

• do not install the apparatus near any heat sources

• do not use the amplifier before connecting it to the correct cabinet

• after switching on, wait about 30-60 seconds until tubes get heated

• switch the amplifier off before any cable change

• in order to ensure proper air circulation, do not block any of the ventilation openings

• never put any liquid containers near the amplifier

• in case of any objects or liquid access inside the amplifier, urgently switch the apparatus off

and unplug the power supply cord

• protect the amplifier from any strikes

• before transporting, wait about 10 minutes for the tubes to cool down

• always use a dry or slightly wet cloth to wipe all dust. Never use solvents to clean

• use additional devices and accessories according to producer’s recommendations

• during storms or when left unused for a long period of time, power supply cord should be

unplugged from the outlet

Crossed-out wheeled bin symbol implies that in EU countries, after use, product must be

discarded separately in a special, adjusted place. It concerns both the apparatus itself as

well as other accessories bearing this symbol. Do not discard such products together with

unsorted communal wastes.

In EU countries there are special systems of collecting used electrical products. Transporting used,

electrical products in certain, adjusted places, prevents their being harmful to the environment and

people’s health.

„LABOGA” Adam Laboga

ul. Partyzantów 35/2

51-675 Wrocław, Polska

www.LabogaAmps.com

We reserve the right to introduce any technical changes and the changes to this amplifier’s image. This

instruction is actual once it has been printed.

Page 7