User Manual

amps to the and button. You'll find an overview of sound-
shaping andspecial functionsavailable on the ENGL SpecialEdition E670and the ENGL
Preamp E570 in the table on page 13.
When you press this button in MIDI mode, it selects MIDI patch 1 in bank A and
in bank B. Pressing this button sends the given MPN to via MIDI channel 1.
When you press this button in S.A.C. mode, it activates a specific channel on an ENGL
amp, for example, . The button's switching action reciprocates with
the , and buttons. This means that rather than serving
as a simple on/off switch, the four buttons are A/B switches that activate a
new channel and deactivate the currently active channel. Note that for all
configurations other than in the , pressing the button a second
time controls a special function on the amp (for example, on the E670).
The LED 2 above the button lights up to indicate the currently active channel; a
flashing LED 2 indicates the activated channel and the activated function (say,
and on the E670 amp). When the or
routine is activated, this button servesto assigntwo sound-shapingor specialfunctions
on ENGL amps to the and button. You'll find an overview of
sound-shaping and special functions available on the ENGL Special Edition E670 and
the ENGL Preamp E570 in the table on page 13.
When you press this button in MIDI mode, it selects MIDI patch 2 in bank A and
in bank B. Pressing this button sends the given MPN to via MIDI channel 1.
When you press this button in S.A.C. mode, it activates a specific channel on an ENGL
amp, for example, . The button's switching action reciprocates with
the , and buttons. This means that rather than serving
as a simple on/off switch, the four buttons are A/B switches that activate a
new channel and deactivate the currently active channel. Note that for all
configurations other than in the , pressing the button a second
time controls a special function on the amp (for example, on the E670).
The LED 3 above the button lights up to indicate the currently active channel; a
flashing LED 3 indicates the activated channel and the activated function (say,
and on the E670 amp). When the or
routine is activated, this button servesto assigntwo sound-shapingor specialfunctions
on ENGL amps to the and button. You'll find an overview of
sound-shaping and special functions available on the ENGL Special Edition E670 and
the ENGL Preamp E570 in the table on page13.
When you press this button in MIDI mode, it selects MIDI patch 3 in bank A and
in bank B. Pressing this button sends the given MPN to via MIDI channel 1.
Function 1 Function 2
MPN 6
MIDI Out
Crunch Channel 2
Channel 1 Channel 3 Channel 4
Channel
Function 1
F1-1 Function 1 Setup
Master A/B
Crunch
Master B Function 1 Setup Function 2 Setup
Function 1 Function 2
MPN 7
MIDI Out
Lead I Channel 3
Channel 1 Channel 2 Channel 4
Channel
Function 1
F1-1 Function 1 Setup
Master A/B
Lead I
Master B Function 1 Setup Function 2 Setup
Function 1 Function 2
MPN 8
MIDI Out
Patch 1/6
Channel 2 Patch 2/7
Channel 2 :
Patch 2/7
Channel 3 Patch 3/8
Channel 3 :
Patch 3/8
:
or button
:
or button
:
5