Z12 MIDI Footswitch Operator´s Manual
Operating Instructions: MIDI-Footcontroller Z-12: page 1 Congratulations on your choice, the ENGL Custom Footswitch Z-12. It is an ultra-modern, system-conform MIDI Footcontroller that let you access 128 MIDI program locations (01 - 128). Program selection can be executed via any of the 16 specified MIDI channels (Poly 1-16).
Operating Instructions: MIDI-Footcontroller Z-12: page 2 8 MIDI OUTPUT Port at the Footcontroller's side panel: Standard 5-pin diode jack for connecting the MIDI cable. Connect this output to the MIDI IN jack of a MIDI device. As an alternative to the power supply socket (9), you can route the power supply (see Table for voltage specifications) via Pin 1 and Pin 2 (center) of the MIDI cable. To supply the power to the footcontroller use a 5 pole diode cable.
www.engl-amps.
