User Manual

40
The current setting is indicated above the given fader in steps. You can drag the
fader to the desired value via mouse. Alternatively, you can click the button with
the little arrow on it up or down to adjust the value step-by-step in the given
direction.
Down, Up, Manual and Write/Copy buttons are the virtual versions of the buttons
of the same name on the preamp, except that here in the virtual world the
various multiple button combinations fall by the wayside.
Transmit
When you click this button, all settings you edited on the RCP are sent to the
preamp. After this command is executed, the settings of the RCP and the preamp
are identical.
Receive
When you click this button, all settings of all features on the preamp are sent to
the RCP. After this command is executed, the settings of the RCP and the preamp
are identical.
Bank
The Bank button changes banks on the preamp. The selected bank (A or B) is
indicated in the display of the RCP behind the preset number.
Shadow
The Shadow button changes from a MIDI preset to a shadow preset. The shadow
preset's status is indicated in the display of the RCP. If you switch to the Shadow
preset via this feature on RCP, the preamp will not switch back to the MIDI preset
automatically. You must quit the Shadow preset by pressing this button again.
Amp Lock, Unlock
This control feature lets you lock and unlock all knobs, sound-shaping features,
control features and the MIDI IN on the preamp. When you set the preamp to
Amp Lock, it can only be controlled via the RCP.
Realtime Lock, Unlock
This function determines whether changes to the faders and sound-shaping
buttons on the RCP are sent to the preamp immediately after you make them.
When you opt for Realtime Lock, you can edit settings to your heart's content on
the RCP and transmit them all at once to the preamp. Realtime Unlock, on the
other hand, sends every adjustment you make to a fader or sound-shaping button
to the preamp right away. Well, not quite right away, because there is a short
delay during data transfer for technical reasons.
The Menu Bar of the Remote Control Panel:
"File menu", Open
The Open option does just that, it opens files with the extension ENT to access
their settings.
The faders and other sound-shaping features on the RCP are set to the given
values after you open a file. You can click Transmit to send these settings to the
preamp.