User Manual

13. MIDI Volume Setup.

Activate this selection routine while the preamp is in Manual mode.

Press the two buttons simultaneously. The preamp switches to MIDI Channel

Select mode. After about two 2 seconds the display will indicate the current

status of the MIDI volume remote control option. In this example it is Off.

<->

Use the UP button to enable remote MIDI volume control so you can

control the preamp's Master volume via an external MIDI volume pedal.

Now store the desired MIDI volume option, On or Off. In this example,

we'll go for On.

Press and hold the WRITE button until the display stops flashing and 000

appears in it indicating the amp is back in Manual mode. Otherwise, this

programming procedure will be canceled.

Note:

You can activate MIDI Volume Setup mode to check the status and press

the MANUAL button to quit this mode without storing a new setting.

The system quits this routine automatically after about 12 seconds.

RITE

OPY

<=>

<->

OWN

after approx.

2 seconds