User Manual

10. Selecting a shadow preset.

For purposes of this example, the preamp is set to MIDI preset 11, bank A.

Press the two buttons simultaneously and hold them down until the all three

decimal points start flashing. This indicates you have switched the preamp to

shadow preset 11, bank A.

After a period of some five seconds, the preamp automatically changes to

the MIDI preset.

You can press the MANUAL button to quit the shadow preset manually.

In the shadow presets, all sound-shaping features are locked. That means you

can't edit them.

Note that as you play the sound you are hearing is shaped by the settings of the

shadow preset. If any of the LEDs surrounding a knob flashes, this tells you that

the knob has different settings in the MIDI preset and shadow preset. If the

setting of a knob in a MIDI and shadow preset are identical, the LEDs surrounding

that knob light up but they do not flash.

Note:

In the shadow presets, the Master knob is also locked. For this reason, we

recommend that you set the Master knob to a low setting before you change to a

shadow preset. If you have dialed in a higher setting, roll it back.

This prevents you from unwittingly exposing your ears to extremely high levels,

for example, when a shadow preset's volume is set to a much higher level than

the MIDI preset's volume.

<=>

MANUAL

ODE

<->

WRITE

OPY

after approx.

5 seconds

GAIN

AIN