User Manual

7. Copying manual settings to a MIDI preset.

For purposes of this example, the preamp is set to MIDI preset 29, bank B.

This activates the Manual settings as your source.

<->

Hold the button down until the display stops flashing and preset 11 lights up

continuously. The settings of Manual were dumped to MIDI preset 11.

Note:

The original settings of this MIDI preset are automatically dumped to shadow

preset 11. You can load them back to the MIDI preset at any time.

Heads Up:

You can't use a locked preset as the target of a copy operation!

Reminder:

You can press the MANUAL button at any time when you want to cancel the

operation and quit Copy mode.

After you have selected Manual, you can change the any sound-shaping settings

as you see fit.

In this example, the Gain knob is set to step 17 and Hi Gain is activated.

<->

RITE

OPY

after approx.

30 seconds

RITE

OPY

<=> =>

Select MIDI preset 11, bank B as your target preset immediately after you activate

Copy.

MANUAL

ODE <->

Press the button briefly. The Copy option is active for about 30 seconds.

The system will quit Copy mode automatically if you don't select a new preset

during this time.

The center decimal point in the display appears to indicate Copy has been

activated.

after approx.

1 second

GAIN

AIN