Installation Instructions

Table Of Contents

TK 61990-11-IS

Installation Best Practices

IImmppoorrttaanntt:: BEFORE beginning the installation disconnect all power to the refrigeration unit

including standby power (if equipped).

• Familiarize yourself with the components to be installed.

• Plan the layout and wire routing prior to permanently mounting any components.

• Make sure wire routes are free from abrasive materials and have adequate clearance from

hot surfaces.

• Holes used for routing harnesses through metal frames, skins or structures should be

smooth and non-marring and lined with a grommet.

• Remove fuse (located on the harness) prior to installation.

• Follow installation instructions specific to your installation kit and model refrigeration unit.

• Electrical harnesses routed inside the refrigeration unit must be secured to other harnesses

or to a solid frame structure with insulated clamps or band wraps to prevent making contact

with rotating or hot components.

• DO NOT attach electrical harnesses to copper tubing, exhaust components or fuel lines.

• Test Procedures must be performed to complete the installation.

• Fill out the Warrant Registration Form after completing the installation.