Specifications

5.2.1 Add a Life Line Pattern

1. Enter settings shown in Table 5.2.

2. Click ADD to see the newly added pattern in the Line Pattern.

5.2.2 Delete a Life Line Pattern

1. Select a Line pattern.

2. Click DEL to remove the pattern from the Line Pattern.

Table 5.2 Life line Configuration Settings

Field Description

Line Pattern Pattern for emergency numbers.

Note: This is the pattern after digit stripping. For example,

configure 911 here even if users dial 9911 to reach the

911 service over PSTN when the PSTN trunk has an

outbound dialplan of “9.”.

Description Arbitrary description information.

5.3 Meet-me Conference (PC#1, PC#2, PC#3 only)

Meet-me conference enables conferencing of multiple parties from various sources. A party could dial

in a conference from an internal IP phone, an external IP phone on Internet, an analog phone via

PSTN, or an IP phone behind another IP PBX. IP PBX allows multiple conference rooms going

concurrently using different room numbers. Before entering a meeting room, the caller has to enter the

correct PIN of the room number.

Note: The administrator who invited another meet-me conference room must drop all parties by

pressing *5 when the meeting ends.

Select Feature -> Meet-me Conference to configure meet-me conference feature.

5.3.1 Add a Meet-me Conference

1. Enter settings shown in Table 5.3.