Specifications

4.4 Route Configuration
A route is a destination number pattern for outbound call matching. A pattern consists of digits 0-9
(including “-”), “*”, “#”, digit set, and wildcard characters like “.”, “X”, “Z”, and “N”.
Table 4.4.1 explains
digit set and wildcard characters.
Note: The “#” in route patter is for some PSTN saver lines that may set “#” as their dial pattern. For
most of the IP Phones, press “#” will send out the dialed number.
Table 4.4.1 Digit Set and Wildcard Characters for Route Patterns
Expression Description
[<digits>] Match any single digit listed explicitly. E.g., digit set [13579]
match odd digits. One may use ‘-‘ to indicate a range of
digits, e.g. [2-8].
. (dot) Match any digit in any length. Usually given in the end of a
pattern to include all numbers matched a specific prefix.
) . (dot) can not be used alone or at the beginning of the
route patterns.
X Match any single digit from 0 to 9.
Z Match any single digit from 1 to 9.
N Match any single digit from 2 to 9.
By selecting Route Management -> Route, the administrator can add, edit, and delete routes in the
Route Management page. Go to Service -> IP PBX Service, and click RELOAD to activate changes.
4.4.1 Add a Route
1. Enter settings shown in Table 4.4.2.
2. Click ADD to see the newly added route in the Route ID.
4.4.2 Edit a Route
1. Edit settings shown in Table 4.4.2 in a row.
2. Click APPLY in the row to update the settings.
30