Specifications

2 System Configuration
This section describes how to configure system parameters used by IP PBX. The factory default of
LAN IP address is 192.168.1.1. Connect to LAN port and the configuration Web interface is at
https://192.168.1.1/. Once connected, the browser will ask for accepting a certificate. Click Yes to see
the home page. Type in the default administrator ID and password (both are admin) to log in for
administration. The administrator password can be changed in the User Management -> User.
1. Click admin in the Login ID.
2. Change the password in Password.
3. Click UPDATE to change the password.
Note: For the system security, please change the password after the first log-in.
2.1 PBX System
The PBX System page briefs IP PBX status to the administrator. Firmware versions, IP addresses of
WAN and LAN interfaces, and default gateway router are shown in this page. Click PBX System to
see the basic information of IP PBX.
2.2 Time Setup
The Time Setup page allows administrator to configure time zone and date for IP PBX. With correct
time setup, functions such as IVR, worktime, and voicemail can present the actions at the right time.
Select System -> Time Setup to see the current setting of time zone and date.
2.2.1 System Time Zone
Click a region/country in the Time Zone list, and click APPLY in System Timezone Setup.
2.2.2 Real Time Clock (RTC) Setup
Click year, month, day, hour, minute, and second in the correspondent list, and click APPLY in Real
Time Clock Setup.
Note: When reset the time 15 minutes later than the time showed in RTC Setup, the system will ask for
re-login.
4