Quick Start Guide
Quick Installation Guide
EZ Repeater
EnGenius Europe | Veldzigt 28, 3454 PW Utrecht (NL)
0900-WIFIABC | www.wiabc.com
Disclaimer: Information may be subject to changes without prior notication.
Follow us
https://www.linkedin.com/company/engeniuseurope
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
https://twitter.com/engeniuseu
EZ Repeater
Enter the username and password of the Ziggo wispot. Press
‘Submit’ and you are connected.
Repeat “Ziggo”
Remove the bottom panel by turning it left.
Connect the power adapter DC inlet to the 12V DV In of the
EZ Repeater and the power adapter to an electrical outlet.
The device is ready for conguring when the left and right LEDs
(Power and Wireless) are lit. This may take about 30 seconds.
We recommend you to use a mobile phone or tablet conguring
your EZ Repeater. It is an easy menu and simple to
operate through the mobile or tablet and set it up. This makes it
quick, easy and fast to use.
Enjoy your EZ Repeater!
Yours sincerely,
The EnGenius Europe team
1
2
Read this rst
Type ezrepeater.eu in your browser.
Select which option applies at your location.
Go to your network center, view the SSIDs (network names) and
select ez@XXXXXX. You can nd this address at the back panel of
your product. Enter your password (this is also on the back panel).
4
5
3



