User manual

33
SSID Conguration
Basic Settings
Enable SSID:
Select to enable or disable the SSID
broadcasting feature.
SSID:
SelecttheSSIDforthecurrentprole.Thisis
the name that is visible to wireless clients on
the network.
Hidden SSID: Select Enable to hide the SSID from
broadcasting. This can help to discourage
wireless users from connecting to a
particular SSID.
VLAN Isolation: Select Enable to prevent wireless clients
from communicating with any other device
on a different VLAN.
VLAN ID:
Enter the VLAN ID for the SSID prole. The
rangeisfrom1~4094.
Note: For the Controller to function properly,
make sure that all ports (on all cascading
switches as well) connected to EWS APs on
theswitchareconguredasthesameVLAN
ID as the Controller’s Management VLAN ID.
Trafc Shaping
TrafcShapingregulatestheowofpacketsleavingan
interface to deliver improved Quality of Service.
Enable Trafc
Shaping:
SelecttoenableordisableWirelessTrafc
Shaping for the Access Point.
Download Limit:
TheDownloadLimitspeciesthewireless
transmission speed used for downloading.
Therangeisfrom1~999Mbps.
Upload Limit:
TheUploadLimitspeciesthewireless
transmission speed used for uploading. The
rangeisfrom1~999Mbps.