Operation Manual

64
Status:
Displays the current status of the Access
Point.
Model:
Displays the model number of the Access
Point.
Name:
Displays the name of the Access Point.
MAC Address:
Displays the MAC address of the Access
Point.
IP Address:
Displays the IP address of the Access Point.
Firmware Version:
Displaysthecurrentrmwareversionofthe
Access Point.
To upgrade, please follow the steps below:
1. Click on Upload New FiletomountAPrmwareonto
EWSSwitchash
2.OncetheAccessPointrmwareisdownloaded
onto the Controller, the list of Access Points that were
selectedforthermwareupgradewillappearunder
Device List.
3. Select the Access Points you wish to upgrade and
click Add to Upgradetostartthermwareupgrading
process.