Operation Manual

63
Bulk Upgrade
The Bulk Upgrade feature allows administrators to up-
gradethermwareofmultipleAaccessPointsatthe
same time. After selecting Bulk Upgrade under Mainte-
nance, the page will display devices that are available to
currently upgrade. Click Upload New File to search for
newrmwareforthedevice(s).
Model:
Displays the model number of the Access
Point.
Firmware Version:
Displaysthecurrentrmwareversionin
use.
File Name:
Displaysthelenameofthermware
uploaded.
Image Size:
Displaysthesizeofthermware
uploaded in bytes.
Upload Time:
Displaysthetimeatwhichthermware
was uploaded.
Device List
This list displays all the current Access Points connected
to the controller. Click on the Access Points you wish to
upgrade. If multiple Access Points are connected, you
cansearchforspecicAccessPointsviathesearchbar
at the boittom right of the page. Click Add to Upgrade to
select devices you wish to upgrade.