Operation Manual
61
Trouble Shooting
From here, you can troubleshoot any issues you have
with Access Points connected to the network. This fea-
ture is designed primarily for administrators to verify and
test the link route between the Switch and the Access
Point. A troubleshooting solution is provided by the sys-
tem so that administrators can know where the problem
lies. Note that the topology of the network needs to be
saved for this function to work properly.
Choosing an Access Point to Diagnose
The list will show the current status of Access Points on
the network. Select an Access Point to begin a diagnos-
tic test. If multiple Access Points are connected, use the
searchbartothetoprightofthepagetondtheAccess
Point you wish to troubleshoot.