Operation Manual

46
Advanced Settings
ClickingontheclustereldofanAccessPointwilldirect
youtoaWirelessSettingspagewhereyoucancongure
settings for the selected cluster.
Band
Steering
Click to enable or disable the Band Steering
function for the cluster. Note that the 2.4 GHz and
5 GHz SSIDs must have the same security settings.
Fast
Handover:
With Fast Handover enabled, the Access Point
will send a disassociation request to the wireless
clientandletitndanotherAccessPointto
handover and associate upon detecting the
wirelessclient’sRSSIvaluelowerthanspecied.
The RSSI value can be adjusted to allow for more
clients to stay associated to this Access Point.
Note that setting the RSSI value too low may
cause wireless clients to reconnect frequently.
Therangeisfrom-90dBm~60dBm.
Guest
Network:
The Guest Network feature allows administrators
to grant Internet connectivity to visitors or guests
while keeping other networked devices and
sensitive personal or company information private
and secure.
Manual IP Settings
IP address:
Specify an IP address for the Guest Network.
Subnet
mask:
Specify the Subnet mask IP address for the Guest
Network.
Starting IP
address:
Specify the starting IP address range for the
Guest Network.
Ending IP
address:
Specify the ending IP address range for the
Guest Network.
WINS Server
IP:
Specify the Windows Internet Name Service
(WINS) Server IP address for the Guest Network.
WINS is Microsoft’s implementation of NetBIOS
Name Service (NBNS), a name server and service
for NetBIOS computer names.
Automatic DHCP Server Settings
Starting IP
address:
Enter the staring IP adrress that you would like
to use.
Ending IP
address:
EnterthenalIPaddressthatyouwouldliketo
use.
WINS Server IP:
Enter the WINS Server IP adress for the cluster.