Operation Manual

43
Member Settings
Click Add or Delete to manage the number of Access
Points in the cluster.
Managed APs:
Shows the Access Points connected to the
Controller.
Cluster Member:
Displays the Access Points that are a part of
the cluster
Show MAC:
Check the box to display MAC addresses in
addition to the Access Point names.
Click Apply to save the changes to the system.
Autoconguration
DHCP:
You can choose to auto assign an IP address if
there is a DHCP server in the network.
Static:
If you wish to manually assign the IP Address,
choose “Static”. Enter the IP Address you
wishtoassigntotheAPandllinthesubnet
mask and default gateway (enter DNS server
address if necessary)