Operation Manual

AP Clusters

AnAccessPointClusterisadynamic,congura-

tion-aware group of Access Points in the same subnet

of a network. A cluster provides a single Access Point to

manage the group of Access Points as a single wireless

network instead of a series of separate devices. Click-

ing on the Device NameeldofanAccessPointthatis

already assigned to a cluster will direct you to a Wireless

Settings page where you can only change the Device

Name, Password & IP Settings of the Access Point se-

lected.WirelessRadiosettingscanbeconguredforin-

dividual Access Points by overriding the cluster settings.

Cluster Name:

Displays the name of cluster group.

APs:

Displays the number of Access Points assigned

to this cluster group.

Member List:

Displays the device name and MAC address

of all Access Points assigned to this cluster

group.

Description:

Show a description of the cluster group.

To manage a cluster on an Access Point:

Add: Creates a new Cluster

Edit: Edits Cluster settings for a cluster

Delete: Deletes a Cluster

1. Enter the name and description of the new cluster and

choose your country from the drop-down menu.

2. In the Member Setting section, all Access Points that

are managed by the EWS Switch that are not currently

assigned to a cluster will be listed on the left.

3. Select the Access Points you wish to assign to this

cluster and press Add. The Access Points will be moved

to the right column.

4.CongureRadio,WLAN,andAdvancedsettingsthen

click on Apply for settings to take effect.