Operation Manual
34
Enable Fast
Roaming:
Select to enable or disable the Fast Roaming
feature for the Access Point.
Security
The Security section allows users to select the security
settings for the given wireless connection to protect the
network. Select None to disable the Security feature for
the network.
WEP
Wired Equivalent Privacy (WEP) is a data encryption pro-
tocol for 802.11 wireless networks which scrambles all
data packets transmitted between the Access Point and
the wireless clients associated with it. Both the Access
Point and the wireless client must use the same WEP key
for data encryption and decryption.
Mode: Select Open System or Shared Key.
WEP Key:
Select the WEP Key you wish to use.
Input Type:
Select the key type. Your available options
are ASCII and HEX.
ASCII Key: You can choose upper and lower
case alphanumeric characters and special
symbols such as @ and #.
HEX Key: You can choose to use digits from
0~9andlettersfromA~F.
Key Length:
Select the bit-length of the encryption key to
be used in the WEP connection. Your available
options are: 64, 128, and 152-bit password
lengths.
Key 1~4:
Based on your Key length selection, please
enter the appropriate Key Value you wish to
use.