Operation Manual

31
Aggregation:
Select whether to enable or disable Ag-
gregation for the Access Point. This func-
tion merges data packets into one packet,
reducing the number of packets. This
also increases the packet sizes, so please
keep this in mind. Aggregation is useful
for increasing bandwidth throughput
in environments that are prone to high
error rates. This mode is only available for
802.11n modes. Fill in the frame rate limit
you wish to use. The range is from 1~32.
Next,llinthemaxbytelimit.Therange
is from 2304~65535.
Click Apply to save the changes to the system.