Operation Manual

27
DHCP:
You can choose to auto assign an IP Address if there
is a DHCP server in the network.
Static:
If you wish to manually assign the IP Address, choose
“Static”. Enter the IP Address you wish to assign to
the AP(s) (if more than one AP is added, you’ll be
promptedtoenterarangeofIPAddress)andllin
the subnet mask and default gateway (enter DNS
server address if necessary).
4. Click ApplyandtheAccessPointsyou’vecongured
will be moved to the Managed list. Note that the status
will change from Connecting to Provisioning to Online.
Once you see Online, your Access Points(s) will have
been successfully added to the Managed list.
Note that if the status is in the connecting mode for
over5minutes,pleasecheckthatthermwareofthe
Access Point and Switch match each other.
1. Access Points in the network will be automatically dis-
covered by the EWS and will be listed in the APs under
Approval list.
2. Select the Access Points(s) you wish to manage and
click Allow.
3. You will be prompted to assign the IP Address under
the IP Assignment screen.
How to Add Access Points to the Managed Access Point List