Operation Manual

24
Device Name:
DisplaysthedevicenameofthemanagedAccessPoint.Clickonthiseldandyou’llbe
redirectedtothecongurationpagewhereyoucaneditsettingssuchasdevicename,
IP Address, Wireless Radio settings, SSID, etc.
IP Address:
Shows the IP Address of the managed Access Point.
Firmware Version:
ShowsthermwareversionofthemanagedAccessPoint.
Last Update:
Display the time the Access Point was last detected and the information was last
updated.
Cluster:
DisplaystheClustertheAccessPointiscurrentlyassignedto.Clickonthiseldand
you’llberedirectedtotheclustercongurationpage.
Column Filter:
ShowsorhideseldsintheAccessPointlist.
AP Detected:
Reveals a list of all APs in the network that the EWS Switch automatically discovers.
Mouse over the discovered Access Point to show general information such as the MAC,
IP, Model, FW, etc.
Add:
Select the Access Point you wish to have the Controller manage using the check box
and click ALLOW to add to the Managed Access Point list.