Operation Manual
169
Access
Http & Https Settings
The EnGenius Layer 2 PoE+ Switch provides a built-in
browserinterfacethatenablesyoutocongureand
manage the Switch via Hypertext Transfer Protocol
(Http) and Hypertext Transfer Protocol Secure (Https)
requests selectivly to help prevent security breaches
on the network. You can manage your HTTP and HHTPs
settings for the Switch further by choosing the length of
session timeouts for HTTP and HTTPs requests. Select
whether to Enable or Disable the HTTP service and
enter the HTTP Timeout session. Next, select whether
to Enable or Disable the HTTPS sevice and enter the
HTTPS timeout session for the Switch.
HTTP Service:
Select whether HTTP Service for the Switch
is Enabled or Disabled. This is enabled by
default.
HTTP Session
Timeout:
Enter the amount of time that elapses before
HTTP is timed out. The default is 5 minutes.
The range is from 0-86400 minutes.
HTTPS Service: Select whether the HTTP Service is Enabled
or Disabled. This is disabled by default.
HTTPS Session
Timeout:
Enter the amount of time that elapses before
HTTPS is timed out. The default is 5 minutes.
The range is from from 0-86400 minutes.
Click Apply to save the changes to the system.