Operation Manual

132
Management
System Information
The System Information screen contains general device
information including the system name, system location,
and system contact for the Switch.
System Name:
Enter the name you wish to use to
identify the Switch. You can use up to
32 alphanumeric characters. The factory
default name is: EWS7228P.
System Location:
Enter the location of the Switch. You can
use up to 32 alphanumeric characters. The
factory default is: Default Location.
System Contact:
Enter the contact person for the Switch.
You can use up to 160 alphanumeric
characters. The factory default is: Default
Location.
Click Apply to save the changes to the system.