Operation Manual
124
Enabled:
Enables 802.1Q VLANs. This feature is
enabled by default.
VID:
Displays the VLAN ID for which the
network policy is dened. The range of
theVLANIDisfrom1-494.
Name:
Enter the VLAN name. You can use up to
32 alphanumeric characters.
Tagged Port:
Frames transmitted from this port are
tagged with the VLAN ID.
Untagged Port:
Frames transmitted from this port are
untagged.
Important: Port-based VLAN and 802.1Q VLAN
are mutually exclusive. If you enable port-based VLAN,
then 802.1Q VLAN is disabled.
Note: The Switch’s default setting is to assign all ports
to a single 802.1Q VLAN(VID 1). Please keep this in mind
whenconguringtheVLANsettingsfortheSwitch.