Operation Manual

101
MST ID:
Displays the ID of the MST that is created.
VLAN List:
Enter the VLAN ID to associate with the MST
ID.
Priority:
Select the bridge priority value. When Switches
or bridges are running STP, each is assigned a
priority. The default value is 32768. The range
is from 0-61440. The bridge priority value is
providedinincrementsof4096.
Regional Root
Bridge:
Displays the bridge ID for the selected MST
instance.
Internal Root
Cost:
Displays the path cost to the designated root
for the MST instance.
Designated
Bridge:
Displays the bridge ID of the root bridge.
Root Port:
Displays the port that accesses the designated
root for MST instance.
Conguration
Name:
ThisnameuniquelyidentiestheMSTI(Multi-
ple Spanning Tree Instance). Enter a descrip-
tive name (up to 32 characters) for an MST
region. The default is the MAC address name of
the device running MSTP.
Conguration
Reversion:
Thisvalue,alongwiththeCongurationName,
identiestheMSTPregionconguredonthe
Switch. Devices must have the same revision
number to belong to the same region.
Click the Apply button to accept the changes or the
Cancel button to discard them.