Installation Instructions
Quick Installation Guide
EnGenius Europe | Veldzigt 28, 3454 PW De Meern,
Netherlands | 0900-WIFIABC | www.wiabc.com
Disclaimer: Information may be subject to changes without prior notication.
Follow us
https://www.linkedin.com/company/engeniuseurope
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
https://twitter.com/engeniuseu
EWS5912FP
Step 7: A login screen will appear. By default, the username is admin and the
password is password. Enter the current username and password of the switch
an then click ‘login’.
Step 8: The EnGenius wireless management switch user interface will appear.
Make sure the controller state is set to ‘Enable’.
Device management
Locating wireless managed access point(s)
Step 1: Go to device management and select access point. All managed access
point(s) connected to the same network as the wireless management switch will
appear on the right side of the screen, under the access point access point(s)
detected list.
Step 2: To manage the managed access point(s), select the desired managed
access point(s) by checking the boxes and click ‘Add’.
Step 3: You will prompted to enter an IP address range for the managed access
point(s)
- Select DHCP for an IP address to be assigned automatically if there is a DHCP
server in the network.
- Select ‘Static’ to enter the IP address, subnet mask, gateway and DNS server
manually. Click ‘Apply’ to continue.
Managing wireless managed access point(s)
The managed access point(s) that are successfully being managed will be listed
under the managed access point(s) list. Click on the device name to access to
its configuration settings. Please refer to the wireless management switch user
manual for more information on configuration settings.
Managing wireless managed switch
For futher switch configurations, click on switch at the top left of the dash board.
Refer to the wireless managed switch user manual for more information on
configuration settings.