Installation Instructions

Quick Installation Guide

EnGenius Europe | Veldzigt 28, 3454 PW De Meern,

Netherlands | 0900-WIFIABC | www.wiabc.com

Disclaimer: Information may be subject to changes without prior notication.

https://www.linkedin.com/company/engeniuseurope

https://plus.google.com/+EngeniusEuropeBVDeMeern

https://www.youtube.com/user/engeniuseuropebv

https://twitter.com/engeniuseu

EWS5912FP

Connecting to the switch

Connecting the devices to the switch and managing the switch

using a web browser

Step 1: Connect the supplied power cord to the switch and plug the other end

into an electrical outlet. Verify the power LED indicator is let on the switch.

Step 2: Wait for the switch to complete boot up. It might take few minutes for

the switch to complete boot up.

Step 3: Connect one end of a cat 5/6 ethernet cable into the Gigabit

(10/100/1000) Ethernet port on the switch’s front panel and the other end to

the ethernet port on the computer. Verify that the LED on Ethernet ports of the

switch is green.

Step 4: Once your computer is on, ensure that your TCP/IP is set to ‘On’ of

‘Enable’. Open ‘Network Connections’ and then click ‘Local Area Connection’.

Select ‘Internet Protocol Version 4’(TCP/IPv4).

Step 5: If your computer is already on a network, ensure that you have set it to

a static IP address on the interface. (Example: 192.168.0.10 and the subnet

mask-address as 255.255.255.0.).

Step 6: Open a web browser on you computer. In the address bar of the web

browser, typ in 192.168.0.239 and choose enter.