Specifications

Wireless Network
This page displays the current status of the Wireless settings of the EWS310AP/EWS320AP.
Wireless Settings
Device Name:
Enter a name for the device. The name you type appears in SNMP management. This name is not the SSID and is not
broadcast to other devices.
Country/Region:
Select a Country/Region to conform to local regulations.
Band Steering:
Enable Band Steering to sends 802.11n clients to the 5GHz band, where 802.11b/g clients cannot go, and
leaves the 802.11b/g clients in 2.4GHz to operate at their slower rates. Band Steering works within the Access Point by
directing 5GHz-capable clients to that band.
*Note:
In order for the Band Steering function to work properly, both the 2.4GHz and the 5GHz SSID and security settings
must be under the same selection settings.