Installation Instructions

Quick Installation Guide

EnGenius Europe | Veldzigt 28, 3454 PW De Meern,

Netherlands | 0900-WIFIABC | www.wiabc.com

Disclaimer: Information may be subject to changes without prior notication.

https://www.linkedin.com/company/engeniuseurope

https://plus.google.com/+EngeniusEuropeBVDeMeern

https://www.youtube.com/user/engeniuseuropebv

https://twitter.com/engeniuseu

EUB1200AC

Package content

- EUB1200AC

- Quick Start Guide

- CD with user manual and drivers

Minimum requirements

- Broadband Internet service (Internet or DSL modem)

- Windows XP SP2 or Vista, Windows 7, MacOS 10.4 or later

- CD-rom drive

- Internet browser (Internet Explorer, Safari, Firefox, Chrome)

- Device equipped with USB port

- 20MB hard disk space WPA2 security encryption

Note: For optimal performance, connect to a USB3.0 port on your computer

and connect to an 802.11AC wireless router.

Installing the EUB1200AC

Note: If your router has a WPS button, you may skip ahead to ‘Section 2’

WPS setup.

A. Insert the included installation CD into the computer you would like to install

the EUB1200AC onto.

B. Click on “Driver/Utility” and install the driver.

C. Click ‘Finish”

D. Insert the EUB1200AC USB adapter into an available USB port.

E. Open the wireless utility that is found in your operating system and select the

available network page.

F. Select the name of the wireless network (SSID) that you would like to connect to.

PAGE 1
EUB1200AC Package content - EUB1200AC - Quick Start Guide - CD with user manual and drivers Quick Installation Guide E. Open the wireless utility that is found in your operating system and select the available network page. Minimum requirements - Broadband Internet service (Internet or DSL modem) - Windows XP SP2 or Vista, Windows 7, MacOS 10.
PAGE 2
EUB1200AC G. Enter the password of your wireless network when prompted and connect to the network. Quick Installation Guide WPS Setup A. Press and hold down the WPS button on your router (check with the user manual that came with your router for any further instructions if necessary). B. Within two minutes, press and hold down the WPS button on the EUB1200AC for two seconds. The LED should start to blink. C. Wait for two minutes. D.