User manual

55
Point-to-Point Tunneling Protocol (PPTP)
WAN Interface
Type:
Select whether the ISP is set to Static IP or will allocate Dynamic IP
addresses.
Hostname: This is optional. Only required if specified by ISP
MAC address: The MAC Address that is used to connect to the ISP.
Login: Username assigned to you by the ISP
Password: Password for this username.
Service IP Address: The IP Address of the PPTP server.
Connection ID: This is optional. Only required if specified by ISP
MTU: The maximum size of packets.
Do not change unless mentioned by the ISP.
Type: You can choose the method that the router maintains connection with
the ISP.
Keep Connection: The device will maintain a constant connection with
the ISP.
Automatic Connection: The device will only initiate connection to the
ISP when there is an Internet connection request made from a LAN
device.
Manual Connection: The user will need to manually connect to the ISP
by clicking the Connect button.
Idle Timeout: When the connection type is Automatic Connection, when Internet
traffic is idle, then the device will automatically disconnect from the ISP.
Please specify the Idle time in minutes.