User`s manual

Manual Configuration
If your router does not support WPS, please configure the Range Extender manually.
1. Connect one end of the supplied Ethernet cable to the Ethernet/RJ45 connector on the
rear panel of the Range Extender. Connect the other end to an Ethernet port on your
desktop or laptop.
2. Important: Your Range Extender’s default IP address is 192.168.1.2. Configure your PC
(Local Area Connection) to use a static IP address that is on the same subnet as your
Range Extender. This means the first three octets preceding the periods in your PC’s IP
address must be the same as those in the Range Extender’s default IP address, with the
last octet being different (for example, 192.168.1.10).
The procedure you use to configure your PC’s IP address depends on the PC’s operating
system. Please follow the instructions appropriate for your PC’s operating system.