User`s manual

Placing Your Range Extender in an Optimum
Location
After configuring your Range Extender, place it in the best location that suits your needs to
ensure optimum performance.
1. Remove the Ethernet cable from the Range Extender and from your desktop or laptop.
2. Using your PC’s wireless utility software, find a location that receives a good-to-excellent
signal (usually at least 3 bars of signal strength) from your router. Avoid dead spots or
weak spots where signal strength is 2 bars or less and areas outside your router’s
coverage area.
3. Place your Range Extender in the location found in the previous step and plug it into the
closest power source to power it on. Confirm that the WLAN LED goes ON to show that
the Range Extender is broadcasting a wireless network signal.