User manual

8
2. Installation
Getting Started
1. Confirm that your Internet and the wireless network are active before powering on your
Range Extender.
2. Connect the two antennas to the antenna connectors on the rear panel of your Range
Extender.
3. Decide whether to use the Range Extender’s Quick Manual Configuration or WPS
Configuration:
– Quick Manual Configuration – It is highly recommended to use this user friendly
configuration method.
– WPS Configuration. You can use this configuration method if your router supports
WPS.
4. After configuring the ERB9250 Range Extender with your router, you can move the
ERB9250 to the place where a good signal (at least 3 bars) is available and which is
preferably in line of sight of your router (as few obstructions as possible). Please see
“Placing Your Range Extender in an Optimal Location” for how to find an optimal
location for the ERB9250 Range Extender.