User manual

16
3. System
3.1. Operation Mode
This page allows you to change the device operation mode. The ERB9250 supports
Universal Repeater (Range Extender) and Client Bridge mode. By default it is configured as
Universal Repeater.
If you are not familiar with Client Bridge function, it is recommended to not select this mode.
Client Bridge is not an AP extender but an “Ethernet Wireless Extender”. Client Bridge
serves as a bridge between wired network and wireless network. Once enabled, you can
only access the device through an Ethernet cable.
If you select Client Bridge mode, you can enable or disable router mode. Router mode will
enable NAT and DHCP functionality on the device. Please disable router mode if you are not
an advanced user or do not wish to use these functions.