User guide

BASIC NETWORK SETTINGS SNMP SETUP
6-32
6.3.2 SNMP Setup
SNMP is used in network management systems to monitor network-attached devices for conditions that warrant administrative atten-
tion.
SNMP Active Enabled or disabled SNMP active state.
SNMP Version Select the SNMP version.
SNMP Manager IP Enter the SNMP manager IP address.
Read Community Enter the SNMP read community name.
Set Community Enter the SNMP set community name.
System Location Enter the system location.
System Contact Enter the system contact.
Trap Active Enable or disable the SNMP trap notifications.
Trap Manager IP Enter the destination address for the trap notifications.
Trap Community Enter the name of the trap community.
Click Apply to save the settings or Cancel to discard changes.