User guide

INSTALLATION SETUP WIZARD USING THE ERB300H/ERB150H AS A MEDIA ENTERTAINMENT BRIDGE
4-6
6. Click System>>Operation Mode to display the Opera-
tion Mode screen.
7. Click Client Bridge in the drop-down menu and click
Apply to save the settings.
Note:
The first time the device is changed to client bridge (CB)
mode, it is assigned an IP address by its DHCP server
(there is no need to set a static IP address).
8. Click Wireless>>Basic to display the Site Survey but-
ton. Click the button to view a list of wireless signals.
9. Select your target router and click Add to AP Profile.
10.If the target router uses encryption, enter the password in
Pre-shared Key and click Save.
If the profile was saved successfully, the following screen is dis-
played.
Click Close to return to the web management page. Select the
target router and click Connect.