User guide

INSTALLATION SETUP WIZARD USING THE ERB300H/ERB150H AS A RANGE EXTENDER
4-3
Note:
If the target router is not in the list, move the ERB300H/
ERB150H closer to the router and click the Refresh but-
ton.
9. Select the target router’s Encryption and Authenti-
cation Type.
10.Enter the Pre-shared Key and click Connect.
Note:
The default SSID, encryption and authentication type of
the ERB300H/ERB150H is initially the same as that of the
target router. The values can be changed by entering a
new value in Repeater (SSID) and selecting a new
value in Encryption and Authentication Type.
To complete the ERB300H/ERB150H installation, remove the
Ethernet cable and place the range extender back in the previ-
ously selected location.
The ERB300H/ERB150H immediately starts transmitting and
receiving the wireless signal and is now ready to connect to
your wireless media devices.