User guide

ENGENIUS QUICK START CONNECTING THE CABLES
3-3
3.1 Connecting the Cables
CAUTION!
UNPLUG ALL PERIPHERALS AND THE ADAPTER BEFORE STARTING WITH THIS PROCEDURE.
1. Connect the adapter cable to an electrical outlet.
Note:
The Power LED lights up to show the device is active.
2. If the ERB300H/ERB150H is acting as a client bridge, con-
nect media entertainment devices, a maximum of four, to the
LAN ports. Plug one end of an Ethernet cable into the LAN
port on the back panel of the device. Plug the other end of
the cable into the Ethernet port of the computer.
Note:
Make sure the network cables and power adapter are firmly con-
nected.
!