User guide

INSTALLATION WALL MOUNTING
2-2
2.1 Wall Mounting
Mounting the ERB300H/ERB150H on a wall optimizes the wire-
less access range.
To mount the device on the wall do the following:
1. Measure the distance from the middle of each mounting
screw hole.
2. Mark the locations of the screw holes on the wall.
3. Drill a hole for each marked location and insert a screw in
each.
4. Install and secure the mounts onto the ERB300H/
ERB150H.
5. Install the ERB300H/ERB150H on the wall.
Note:
Choose a location that is within reach of an electrical
outlet for the AC adapter and the DSL or Cable modem.
Note:
Make sure to leave enough of the screw head above the
wall surface to secure the ERB300H/ERB150H.