Installation Instructions

Quick Installation Guide
EnGenius Europe | Veldzigt 28, 3454 PW De Meern,
Netherlands | 0900-WIFIABC | www.wiabc.com
Disclaimer: Information may be subject to changes without prior notication.
Follow us
https://www.linkedin.com/company/engeniuseurope
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
https://twitter.com/engeniuseu
EP802
Base station installation
1. Install base station antenna.
2. Plug the transformer end of the base station AC/DC
adapter into a standard AC electrical power outlet,
plug the other end into the “DC In” jack on the back of the
base station.
3. Plug phone cord into the “LINE” jack.
4. A standard telephone or answering machine can be
plugged into the adjacent receptacle on the bottom
of the base station marked TEL.
Handset and charger installation (Charger only for EP802 HC)
1. Plug the transformer end of the charger AC/DC adaptor into a standard AC
electric power outlet, plug the other end into the “DC In” jack on the back of the
charger.
2. Install battery pack onto the handset.
3. Install handset antenna.
4. Place handset onto the charger front slot.
5. Fully charge the battery for three hours before use.
6. The phone system is now ready to perform basic functions such as making
and receiving phone calls and intercom calls. No base station or handset
programming is needed for basic operations.
Handset registration
1. Press MENU-7 to enter the registration mode.
2. Press and hold the base’s PAGE button for 3 seconds until the ‘In Use’-LED
(white color) lighting up and flashing, also the base station will emit prompt
sound to remind you the base station is in the registration mode.
3. Press handset key “1”, this completes the registration process. The base
station will assign a handset ID between 12 and 19 automatically. The assigned
ID will be displayed on the handset LCD, indicating successful registration.
Features handset
1. TALK/FLASH
a. Places or answers a telephone or intercom call
b. Sends a flash signal to phone line to retrieve a dial tone after the call ends,
or to perform the call waiting feature provided by local phone companies
during a call.
2. SPEAKERPHONE
Press and hold the key for over 2 second to enable/disable the speakerphone
during incoming, outgoing or intercom call.
3. 2-WAY INTERCOM
a. Places an intercom call to another handset, a group handset (group paging)
or all registered handsets.
b. Intercom calls are digital, full duplex, and are conducted without the
assistance from the base station.
4. BROADCAST
a. Half duplex broadcasting to handsets for immediate announcement
b. Half duplex broadcasting to base stations
Re-press the key on the left top corner of handset to activate the
broadcast function.