Installation Instructions

Quick Installation Guide
EnGenius Europe | Veldzigt 28, 3454 PW De Meern,
Netherlands | 0900-WIFIABC | www.wiabc.com
Disclaimer: Information may be subject to changes without prior notication.
Follow us
https://www.linkedin.com/company/engeniuseurope
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
https://twitter.com/engeniuseu
EP801
Base station installation
1. Install base station antenna.
2. Plug the transformer end of the base station AC/DC
adapter into a standard AC electrical power outlet, plug
the other end into the “DC IN” jack on the back of the base
station.
3. Plug phone cord into the “LINE” jack.
4. A standard telephone or answering machine can be
plugged into the adjacent receptacle on the bottom of
the base station marked TEL.
Handset and charger installation (Charger only for EP801 HC)
1. Plug the transformer end of the charger AC/DC adapter into a standard AC
electric power outlet, plug the other end into the “DC In” jack on the back of the
charger.
2. Install battery pack onto the handset.
3. Install handset antenna.
4. Place handset onto the charger front slot.
5. Fully charge the battery for three hours before use.
6. The phone system is now ready to perform basic functions such as making
and receiving phone calls and intercom calls. No base station or handset
programming is needed for basic operations.
Handset registration
1. Press MENU-7 to enter the registration mode.
2. Press and hold the base’ registration (REG) button for 2 seconds until
and LEDs lighting up and flashing, also the base will emit ringing to remind
you the base is in registration mode.
3. Press handset key “1”, this completes the registration process. The base
station will assign a handset ID between 12 and 19. The assigned ID will be
displayed on the handset LCD, indicating sucessful registration.
Handset features
1. TALK/FLASH
a. Places or answers a telephone or intercom call.
b. Sends a flash signal to phone line to retrieve a dial tone after the call ends,
or to perform the call waiting feature provided by local phone companies
during a call.
2. SPEAKERPHONE
a. Press the key to enable/disable the speakerphone during incoming, outgoing
or intercom call.
3. 2-WAY INTERCOM/TRANSFER
a. Places an intercom call to another handset, a group handsets (group paging)
or all registred handsets.
b. Intercom calls are digital, full duplex and are conducted without the
assistance from the base.
4. BROADCAST
a. Half duplex broadcasting to handsets for immediate announcement.
b. Half duplex broadcasting to base stations.
Re-press the key on the side of handsets to activate the broadcast
function.