User manual

58
9 Network Configuration Example
This chapter describes the role of the EOC5510 with 4 different modes. The Access Point mode’s
default configuration is a central unit of the wireless network or as a root device of the wired
environment.
9.1 Access Point
Access Point
Step1 Login to the web-based configuration interface with default IP 192.168.1.1
Step2 Select your country or region’s regulation.
Step3 802.11a wireless network
Step4 Use site survey to scan channels that have been used in nearby area.
Step5 Select channel with less interferences.
Step6
Specify the SSID for your broadcast SSID and you can also configure multiple SSID at
the same time.
Step7 Verify VLAN identifier to separate services among clients
Step8 Setup the authentication settings.
Step9 Press Apply to save all changes.
Note: For more advanced settings, please refer to the previous chapters.
Wireless Client
Step1 Select wireless mode you would like to associate with.
Step2 Use site survey to scan nearby Access Point and select the certain AP you would like