User`s manual

11a/b/g Wireless Multi-Client Bridge/AP/WDS Version 1.0
38
 By default, the Access Point does not have a password configured for administrator
access to the web-based interface. Specify and password and then re-type it in the
verification box. Then click on the Next button.
 Select your time zone from the drop-down list and then click on the Next button.
 The setup wizard is almost complete, click on the Connect button.
 The configuration has been saved, click on the Reboot the Device button.
 The dialog box asks you to confirm your action, click on the OK button.
 The connection wizard is complete. Please wait while the system is rebooting.
Note: Do no un-plug the device during this process as this may cause permanent
damage.